/archiv/comp/ · 19.01.2014

Silenced Server Rack from Plywood

closed plywood server rack
Abb. 1

Back in the days when I was running my Sun Netra T1 Server pizza box I needed a place to put that baby. As it also was incredibly noisy I designed a server rack that would double as a simple sideboard.

Closed server rack

The basic idea was simple since the Netra drew in cool air in the front and exhausted warm air in the back. As I did not want the noise to have a straight path trough the rack I settled for a s-shaped air-sound path. on the back cool air was drawn into the case to the front. A wooden divider board basically made this act like a duct. In the front (where the rack rails are mounted, the divider ended with the rails. sunnetrat-1185373850-343 sunnetrat-1185373848-342 sunnetrat-1185373853-345

The gap between the divider and the door allowed the server to draw from this cool air eshausting it at the back where the principle is mirrored – warm air at the top goes trough a duct to the front of the cabinet where rubber seals effectively seal the door.

A plexi glass on the rails filling up the unused space made sure that warm and cool air did not mix. sunnetrat-1185373876-350

I installed a second door on the side for easy servicing. A separate shelf was installed as well.